-
BETAFPV Meteor75 Pro HD DJI O4 Whoop Quadcopter ELRS
Description: The Meteor75 Pro O4 is a cutting-edge 1S high-definition whoop quadcopter optimized for the DJI O4 Air Unit. With an 80.8mm wheelbase, powerful 1102 | 22000KV motors, and GF 45mm 3-blade propellers, it delivers outstanding flight performance and stability. Equipped with the advanced Matrix 1S 3IN1 HD FC and integrated DJI O4 shock-absorbing components, […]
-
BetaFPV P1 Air Unit HD VTX
The P1 Air Unit HD VTX, part of the ArtLynk protocol ecosystem, delivers a stunning 1080p@60fps live feed with approximately 60ms latency and an impressive transmission range of over 5km. Its 1/2.9” CMOS sensor and wide 170° field of view provide an incredibly immersive and detailed perspective, making every flight intuitive and responsive. Designed for […]
-
BETAFPV Pavo Femto HD DJI O4 Brushless Whoop Quadcopter
Description: The Pavo Femto is a 2S high-definition brushless drone tailored for the DJI O4 Air Unit, delivering exceptional 4K/60fps video recording in a compact design. Powered by 1102 motors with a thrust-to-weight ratio of 6.75:1 and an optimized frame, it offers enhanced power and stability. Featuring precise PID and RATE tuning, a shock-absorbing system […]
-
BETAFPV Pavo20 Pro II Brusless Whoop Frame
The Pavo20 Pro II Brushless Whoop Frame is tailored for the 2.2″ Pavo20 Pro II cinewhoop, now offering expanded compatibility with both DJI O4 Air Unit and O4 Air Unit Pro through its new carbon plate. Its revolutionary assembly system upgrades to a 4-screw configuration with embedded nuts and supported structure, enabling quicker, more secure […]
-
BETAFPV Pavo20 Pro II HD DJI O4 Pro Brushless Whoop Quadcopter
Description: The 2.2 Inch Pavo20 Pro II redefines lightweight freestyle performance, now offering seamless compatibility with both the DJI O4 at 79g and O4 Pro at 107.7g. This next-generation model introduces the upgraded II Frame with a supported structure and 4-screw assembly for enhanced rigidity and easier building, alongside a new integrated RGB LED strip […]
-
BETAFPV SuperD ELRS Diversity Receiver
Berikut adalah teks yang sudah dirapikan jarak antar-paragrafnya agar lebih nyaman dibaca: BETAFPV SuperD ELRS is the first True Diversity Receiver that applies two antennas, dual receiver chains, and TCXO (temperature compensated crystal oscillator) tech, achieving a super accurate frequency rate and excellent performance in extreme temperature environments. It offers 2.4GHz and 915MHz/868MHz versions, and […]
-
BETAFPV SuperP 14H Diversity ELRS Receiver PWM Output
Being the first to market! SuperP 14CH Diversity Receiver has been designed not only for long-range flying, aerial photography but also suitable for the application of fixed-wing, helicopters, RC cars, boats and etc. It has TCXO oscillator, two antennas, dual receiver chains, and Plug-N-Play ports, and adds more features, which support 14 channels for the […]
-
BETAFPV SuperX ELRS Nano Receiver
BetaFPV SuperX Nano is a dual-band receiver with full diversity for the ExpressLRS (ELRS) system. ExpressLRS is an advanced open-source RC system with long-range, low latency, high refresh rate, and many useful features. Learn more about ELRS here. The receiver uses two full-featured receive/transmit chips and two antennas. The receiver uses Semtech LR1121 chips, which […]
-
BETAFPV T Type Antenna (2pcs)
The dipole T antenna is designed and manufactured by BETAFPV for a 2.4G/915MHz/868MHz receiver. This antenna is omnidirectional. RF balun circuit comes with this dipole antenna, just inside the injected rubber enclosure. Every piece of the antenna is tested with the frequency spectrograph to make sure it works in the correct status. Specification Coaxial cable […]
-
BetaFPV VR04 Pro FPV Goggles HD Version
Designed for total immersion and comfort, the VR04 HD FPV Goggles feature a spacious, glasses‑friendly interior so you never have to remove your eyewear, plus contoured face padding and a soft rubber nose bridge that block outside light for focused, extended sessions. The VR04 HD comes with a 2600mAh battery for 3‑hour runtime, while the […]
-
CADDXFPV 2.1mm Lens for Ratel 2 / Nebula pro/ DJI camera
Caddx DJI 2.1mm M12 Replacement Lens for DJI Camera / Caddx Nebula Pro / Nebula Micro and Ratel2 Product Details Brand: Caddx FPV SKU: C0PJ-TSZ02 Variant: M12 2.1mm Lens for Caddx Vista HD System Weight: 5g Package Includes 1x Caddx DJI M12 2.1mm Replacement Lens
-
CADDXFPV Ant Analog Camera
Specification: Model: Caddx Ant Image Sensor: 1/3″ CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL MENU: Support IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES BLC: YES WDR: Global WDR […]
Menampilkan 13–24 dari 293 hasil