-
HappyModel ES24TX Pro ELRS Transmitter Module
The ES24TX Pro Micro ExpressLRS TX module is a upgrade version of ES24TX module. Max output up to 1000mw, reserved Cooling Fan and RGB LED module. This Micro TX module support most of the OpenTX radio transmitter that with Micro JR bay. And this time the ES24TX Pro module comes completely assembled before out of […]
-
Happymodel ES24TX Slim Pro ELRS Transmitter Module
This Slim Pro TX module is designed by Happymodel and based on the open source- ExpressLRS which is a very popular low latency and high packet rate RF module for RC Airplane and FPV Racing drone. Its main hardware architecture is ESP32, ESP8285 and SX1280 RF chip. The ES24TX Slim Pro module is a complete […]
-
Happymodel ES900RX 915MHz ELRS Receiver
OVERVIEW: ES900TX and ES900RX modules are a set of Long Range 915MHz/868MHz(optional) wireless transmission equipment developed and designed based on the open source software ExpressLRS. This set of modules is characterized by ultra-long range, stable operation and low latency. The module is compatible with most Opentx remote controllers, especially suitable for Radiomaster TX16S and Jumper […]
-
Happymodel ES900RX 915MHZ Replacement T Antenna (UFL / IPEX1)
Frequency: Comaptible with both 915MHz and 868MHz Polarization: linear polarization Impedance: 50 Ω Antenna Gain: 2.5dBi(915MHz) 1.5dBi(868MHz) Working Temp: -40~80℃ Humidity: 95%~100% RH RF Cable : RG1.13 Connector: IPEX1 Weight: 3.57 g Cable Length: 80 mm Width: 140mm Compatibility: Happymodel ES900RX , and other 900MHz ExpressLRS receiver with IPEX Connector,TBS CROSSFIRE NANO RX Package: 1x […]
-
Happymodel EX0802 Brushless Motor 1mm shaft
Specifications: Brand name: Happymodel Item name: EX0802 brushless motor KV: 14000KV 19000KV 22000KV 25000KV optional Shaft Diameter: 1.0mm Configuration: 9N12P Stator Diameter: 8mm Stator Length: 2mm Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm Terminals: JST1.25mm No. of Cells(Lipo): 19000KV/22000KV/25000KV compatible with only 1S lipo 14000KV compatible with 1-2S lipo Wire length(include connector): 14000KV/19000KV/25000KV: 27mm 22000KV: 40mm Weight: 1.7g 19000KV […]
-
Happymodel EX1103 KV11000 1.5mm shaft Brushless Motor for Mobula8
Specification: Mode: EX1103 KV11000 Configuration:9N12P Stator Diamter:11mm Stator Length:3mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm Weight(g):3.8g No.of Cells(Lipo):1-2S Compatible with: Mobula8, Bassling, and even DJI Neo 1 Includes: 1x Motor EX1103 KV11000 3x Screws
-
Happymodel EX1103S KV7000 Brushless Motors 1.5mm shaft
Notice: Larva X v2 version frame were already compatible with 4-hole motors Specifications: Mode: EX1103S KV options: 7000KV Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Shaft Diameter: Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm Weight(g):3.8g No. of Cells(Lipo): 2-3S Features: High efficiency and smooth Dual bearing design and more balance Better for Toothpick building Compatible with 40mm-75mm propellers Upgrade motor for […]
-
Happymodel EX1202.5 Brushless Motor 1.5mm shaft
Specifications: Mode: EX1202.5 KV option: KV6400 KV8000 KV11000 Configu-ration:9N12P Stator Diamter:12mm Stator Length:2.5mm Out Shaft Diameter:Φ1.5mm Inner Shaft Diameter: Φ2mm Motor Dimension(Dia.*Len):Φ15mm*15mm Weight(g):4.4g No.of Cells(Lipo): KV6400 support 2-3s (Original motors for Crux3) KV8000 support 2-3s (Original motors for Cine8) KV11000 supoort 1s only Included: 1 x Happymodel EX1202.5 Motor 1 x Screw Set Note: These […]
-
Happymodel EX1404 Brushless Motor 1.5mm shaft
Specifications: Mode: EX1404 KV option: KV2750 KV3500 KV4800 Configu-ration:9N12P Stator Diamter:14mm Stator Length:4mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ17.8mm*17.6mm Weight(g):8.7g No.of Cells(Lipo): KV2750 compatible with 4S Lipo KV3500 compatible with 3-4S Lipo KV4800 compatible with 3S Lipo Included: 1 x Happymodel EX1404 Motor 1 x Screw Set Note: These motors do not have threaded shafts. You can […]
-
Happymodel FOV Extender Kit for DJI O4 Camera Compatible with Mobula7 O4 and Mobula8 O4
Specification: Brand Name: Happymodel Item Name: FOV extender kit for DJI O4 camera compatible with Mobula7 O4 and Mobula8 O4 Weight: Only 3.2g – Built-in widening lens – FOV angle up to 150 degree – 3D printed Camera holder – Include UV filter, ND8 filter, ND16 filter – Compatible with Mobula7 O4 and Mobula8 O4 […]
-
Happymodel HQPROP 45MMX3 Propeller for Mobula7 O4
The HappyModel HQProp 45MMX3 Propeller for Mobula7 O4 delivers exceptional thrust and efficiency for your micro drone, ensuring smooth, high-speed flights. Made from durable polycarbonate, these ultra-lightweight 2-blade props enhance agility and responsiveness, making them the perfect upgrade for precision flying and ultimate control in tight spaces. Specification: HQProp Whoop Propeller 45MM Propeller Diameter : […]
-
Happymodel Linear Dipole 5.8Ghz Antenna (UFL / IPEX1)
Specifications Connector: IPX/U.FL Cable: RG113 Weight: 0.5g Length: 47mm/60mm/75mm Frequency: 4900 MHz ~5900 MHz S.W.R:
Menampilkan 337–348 dari 628 hasil