-
Matek CRSF to PWM converter CRSF-PWM-6
Matek Konvertor can turn a receiver with CRSF protocol into a receiver with 6 PWM outputs for servos. This will be especially appreciated by pilots of classic aircraft models without a FC. So they can use their favorite ELRS or Crossfire Nano receiver. The receiver is connected to the board via UART – pins TX1 […]
-
Matek CRSF to PWM converter CRSF-PWM-C
This product will be useful for people requiring PWM outputs from their ExpressLRS or Crossfire radio receiver. It converts from CRSF, which is the protocol used by ExpressLRS and Crossfire receivers, to PWM outputs which is the signal used to drive servos and ESCs. This particular breakout board provides 10 PWM connections and PWM output frequency […]
-
Matek Digital Airspeed Sensor AS-DLVR-I2C
The AS-DLVR-I2C airspeed sensor is a high-end airspeed sensor designed for RC aircraft with a flight controller. It connects via the I2C bus using SCL and SDA pads (similar to a compass). The sensor is based on the DLVR-L10D chip and is the best available airspeed sensor supported by ArduPilot and iNav. It is the only sensor that requires no calibration. ArduPilot has removed default support for DLVR sensors […]
-
Matek Digital Airspeed Sensor ASPD-4525
The ASPD-4525 is an airspeed sensor designed for RC airplanes with a FC. The sensor is connected via the I2C bus via the SCL and SDA pads (just like the compass) and can be used with both iNav and Ardupilot firmware. Key Features Input voltage: 5V Sensor: MS4525DO Current: 5mA Output: I2C (SCL, SDA) […]
-
Matek Digital AirSpeed sensor ASPD-AUAV
Matek ASPD-AUAV is an airspeed sensor designed for RC aircraft using the ArduPilot firmware. The ASPD-AUAV is based on the AUAV-L30D sensor and supports multiple interfaces – CAN (DroneCAN protocol), I2C, and UART (MSP). The most common connection is via the CAN bus, ensuring reliable communication with the flight controller and easy integration into modern systems. It also features a CAN bootloader and status LEDs for clear indication. The […]
-
Matek Digital AirSpeed sensor ASPD-DLVR
Overview: The Matek Digital airspeed sensor (UAVCAN/DLVR version) is designed specifically around ArduPilot and their flight controllers supporting UAVCAN bus such as the H743 Wing. Matek also sell a more simpler version for use with INAV, see other items. Please see the Matek website for details on how to configure http://www.mateksys.com/?portfolio=aspd-dlvr#tab-id-2 Specifications: – ArduPilot AP_Periph F303 CAN […]
-
Matek ELRS 2.4GHz 6Ch Vario Receiver, R24-P6V
Overview: The Matek 2.4GHz R24-P6V ELRS 6Ch Vario Receiver is a versatile and feature-packed receiver designed specifically for RC gliders, fixed-wing aircraft, and FPV drones. This compact receiver utilizes the ExpressLRS protocol, ensuring fast, reliable, and low-latency control for your aircraft. Equipped with an ESP32 processor and SX1281 RF chip, the R24-P6V operates on the […]
-
Matek ELRS 2.4GHz PWM Receiver, R24-P6
Specifications: ESP8285, SX1281 Antenna connector: IPEX MHF 1 6x PWM outputs Support 2~8S VBat voltage sense RF Frequency: 2.4GHz (2400~2480MHz) Telemetry power: 12dbm Receiver output protocol: PWM Input voltage: 4~9V DC @ “+” pad Voltage sense: 34V Max. @ “VBat” pad Power dissipation: 45mA(binding), 85mA(wifi mode) PCB size: 20mm x 18mm Weight: 2g w/ antenna […]
-
Matek ELRS 2.4GHz Receiver, ELRS-R24-D
A small receiver for the ExpressLRS system at a frequency of 2.4GHz. The receiver has 2 antennas for diversity reception. It will be appreciated especially by those who are looking for a reliable RC link for longer distances. The antennas are connected on the IPEX1 connector and can thus be easily replaced. More information Key Features Chip: […]
-
Matek ELRS 2.4GHZ True Diversity Receiver, R24-TD
Matek ELRS 2.4G True Diversity is a small receiver for system ExpressLRS at 2.4GHz. The receiver has 2 antennas for full diversity. It will be especially appreciated by those looking for a reliable RC link over longer distances and owners of the ELRS Gemini module.The antennas are connected to the IPEX1 connector and can be easily swapped out. The receiver has telemetry with power up […]
-
Matek Flight Controller F405-Wing-V2
Matek F405-Wing V2 is a control unit designed primarily for airplanes and single wing. The board also includes a PDB(power distribution board) for power distribution from the battery to the board and controllers. Also included is a current sensor(220A), 5/6/7.2V 5A BEC for servos, 9/12V 2A for video transmitter, camera or gimbal, and 5V 2A BEC for RC receiver, camera, buzzer, GPS, LEDs and other […]
-
Matek Flight Controller H7A3-WING
Matek H7A3 Wing is a powerful flight controller designed primarily for airplanes, VTOLs, and other advanced models that require a large number of outputs, accurate measurements, and reliable performance. The board supports 3–6S LiPo input and runs on Ardupilot firmware. At its core is the H7A3 processor combined with an ICM42688P gyro and a SPL06-001 barometer for altitude sensing. For analog video, it features an OSD chip and a MicroSD slot for […]
Menampilkan 1–12 dari 18 hasil