Matek CRSF to PWM converter CRSF-PWM-6
Stok 10
Matek Konvertor can turn a receiver with CRSF protocol into a receiver with 6 PWM outputs for servos. This will be especially appreciated by pilots of classic aircraft models without a FC. So they can use their favorite ELRS or Crossfire Nano receiver. The receiver is connected to the board via UART – pins TX1 and RX1. In addition to converting the CRSF signal to PWM, the board can also send telemetry data. On the board there is a VBat pin for the battery voltage sensor, a Curr pin for connecting an external current sensor, and RX2 and TX2 pins for connecting the GPS module.
Wiring Diagram
Key Features
- Input voltage: 5V
- Input protocol: CRSF (ELRS and Crossfire receivers)
- Output protocol: 6x PWM
- PWM Frequency: 50/100/160/330/400Hz (50Hz default)
- UART: 2x (receiver and GPS/Settings)
- Telemetry: Current, Voltage, Capacity, GPS coordinates, GPS speed, Altitude, Number of satellites
- Battery sensor: 36V Max
- Current sensor: 0-3.3V
- Size: 25x16mm
- Weight: 1.3g
Package Includes
- 1x Matek converter
| Berat | 0,125 kg |
|---|
Hanya pelanggan yang sudah login dan telah membeli produk ini yang dapat memberikan ulasan.
Cek Ongkir
Setiap pesanan dikemas dengan aman untuk membantu menjaga produk selama proses pengiriman. Kami menawarkan produk original dengan harga yang kompetitif dan layanan terbaik. Pilihan metode pengiriman yang tersedia akan ditampilkan saat checkout sesuai dengan produk dan alamat tujuan.
Kami berkomitmen menyediakan produk original dan layanan terbaik. Apabila produk yang Anda terima tidak sesuai atau mengalami kerusakan saat diterima (DOA), silakan hubungi Customer Support maksimal 48 jam setelah paket diterima. Pengembalian barang, pengembalian dana, dan garansi mengikuti Kebijakan Pengembalian Dana dan Barang yang berlaku.
Read MoreProduk Terkait
-
Happymodel 2.4G ELRS EP1 EP2 EP1DUAL TCXO Receiver
EP1 EP2 ELRS receiver is the hottest Tiny ExpressLRS receiver since it was released. Now the new TCXO version EP series receiver apply “temperature compensated crystal oscillator”, accurate frequency and excellent performance in extreme temperature environments make these TCXO much reliable. EP1 TCXO Receiver Type: ISM2.4GHz ESP8285 MCU SX1280(SX1281)IMLTRT RF Module Omni directional antenna Frequency […]Rp220.000 -
TBS CROSSFIRE NANO RX (SE)
TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in this case, the minimum!). The end result is a full range receiver, at the […]Rp380.000 -
Matek CRSF to PWM converter CRSF-PWM-C
This product will be useful for people requiring PWM outputs from their ExpressLRS or Crossfire radio receiver. It converts from CRSF, which is the protocol used by ExpressLRS and Crossfire receivers, to PWM outputs which is the signal used to drive servos and ESCs. This particular breakout board provides 10 PWM connections and PWM output frequency […]Rp175.000 -
Radiomaster XR3 Nano Multi-Frequency Antenna Diversity ELRS Receiver
The XR3 Receiver is a versatile, ultra-compact ExpressLRS receiver measuring just 20 × 15 mm. Powered by the third-generation Semtech LR1121 transceiver, the XR3 operates on either the 2.4 GHz or Sub-G 900 MHz bands. Whether using 2.4 GHz or 900 MHz, the XR3 delivers strong range and sensitivity in a small, lightweight package—well suited […]Rp445.000 -
BETAFPV ELRS Nano Receiver
BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance. Specification Weight: 0.7g (receiver only) Size: 12mm*19mm Telemetry power: […]Rp149.000 -
Radiomaster ER5C-V2 ELRS (External Antenna)
ER5C V2 receiver is built on the innovative ExpressLRS protocol. It provides high performance, dependable signal, versatile configuration, and quick response time, offering a new experience for your projects and applications. The ER5C V2 ELRS receiver can drive up to 5 servos and has built-in receiver voltage telemetry and battery telemetry with the ability to […]Rp285.000
Belum ada ulasan.