-
JHEMCU RuiBet 55A 3-6S Dshot600 4IN1 ESC 30x30mm
Specifications: Product name: RuiBet 55A four in one electrical regulator Input voltage: 3-6S (11-27V) Continuing current: 55A * 4 BEC: No Galvanometer: Yes Installation: hole pitch 30.5MM/M4 Boundary dimension: 39.5 * 41MM Firmware: BLHELI_ S J_ H_ 15_ REV16_ 7. HEX Weight: 14.5 grams Shipping list: RuiBet 55A four in one electrical adjustment * 1 […]
-
JHEMCU RUIBET 60/65A 3-6S DSHOT600 4IN1 ESC 30x30mm
Item: JHEMCU RuiBet 60A / 65A 3-6S 4-in-1 ESC Parameters: Input voltage:: 3-6S (11-27V) Continuous current: 60A*4 / 65A*4 Weight: 15.6g BEC: NO Current meter: YES Installation: Aperture 30.5mm/M4 Dimensions: 44.4*43mm Firmware: BLHELI_S J_H_15_REV16_7.HEX Package Included: RuiBet 60A / 65A Quad–ESC *1 8p*1.0MM double-ended plug cable *1 XT60H-M plug *1 1000 UF/35V capacitor *1 12 […]
-
JHEMCU RuiBet Tran-3016W 5.8GHZ 1.6W Analog VTX 30x30mm
Small videotransmitter with max power 1600mW which makes the VTX suitable for long range and freestyle copters. Power input is 2-6S LiPo battery. VTX is supporting IRC Tramp protocol and you can use VTX in 30,5×30,5mm stack. Key Features Input voltage: 7-26V (2-6S) Mounting holes: 30,5×30,5mm M3 Size: 36x36mm Weight: 7,6g Power: 25/200/400/800/1600mW Integrated microphone […]
-
JHEMCU Smoke Stopper 1-6S Fuse Holder Test Short-Circuit Protection
About this product Avoid imminent disaster with this Smoke Stopper: A self-healing / re-settable fuse in line with the power going to your quad. Specifications Connector: XT30 & XT60 (input and output) Input voltage: 1-6S (3 – 30V) Trip current: 1.0A Hold current: 0.5A Disclaimer: This is just a fuse. Things may still be damaged […]
-
JHEMCU VTX30-800 5.8GHZ 800MW Analog VTX 30x30mm
The JHEMCU VTX30 is an affordable analog video transmitter operating in the 5.8GHz band. The VTX30 features 30.5×30.5 mm mounting hole spacing, making it easy to install into a standard stack. It comes with an MMCX connector for connecting a pigtail or antenna. The output power, band, and channel can be set either via a button […]
-
Jumper 2.4G ELRS TX Module AION NANO
The Jumper AION Nano ELRS Tx Module is based on the ExpressLRS project, an open-source RC link for RC applications. ELSR is currently one of the most advanced RC transmissions. It offers a reliable long-distance link, a high refresh rate of up to 500Hz, adjustable power, update via wifi and more. ELRS on 2.4G outperforms classic RC systems […]
-
Jumper Smart Color Screen ELRS Radio Controller Hall Sensor Gimbals
-
LiPo Battery Safety Bag for Charging, Storage, and Transport
CNHL LiPo Battery Safety Bag is a practical LiPo safe bag for users who want a safer way to charge, store, and transport LiPo and other lithium batteries. It is a simple extra layer of protection for everyday battery handling at home, in the workshop, or on the way to the field. This bag features […]
-
LS-008D 5.8G 40CH DVR Antenna Diversity FPV Goggles
008D are basic FPV goggles for starting FPV pilots. The basis is a 4.3″ IPS display with an aspect ratio of 16:9 and a resolution of 800×480 pixels, which is sufficient for displaying an analog video signal. The reception is taken care of by a dual receiver supporting all the usual 40 channels. In the […]
-
Mark4 5 / 6 / 7 Inch FPV Drone Frame Kit
Name: REA-Mark4-5inch Propeller: 5 inch Weight: 102g Motor to moto: 225MM Size: 145*172MM Arms plate: 5MM Top plate: 2.5MM Bottom plate: 2.5MM Side plate: 2.5MM Camera mount size:19.3mm Recom mended configuration: Flight Controller: RF/Kiss/F3/F4/F7 Motors: 2205/2206/2207/2305/2306 ESC: 30A-50A Propeller: 5 inch Battry: 4S 1500mAh-6s 11 50mAh Name: REA-Mark4-6inch Propeller: 6 inch Weight: 111g Motor to […]
-
Mark4-HD 5 / 6 / 7 Inch FPV Drone Frame Kit
Name: REA-Mark4 HD5 Propeller: 5 inch Weight: 121g Motor to moto: 224MM Size: 138*176MM Arms plate: 5MM Top plate: 2.5MM Bottom plate: 2.5MM Side plate: 2. 5MM Recommended configuration: Flight Controller: RF/Kiss/F3/F4/F7 Motors: 2205 /2206/2207/2305/2306 ESC: 30A-50A Propeller: 5 inch FPV: DI FPV Air Unit Battery: 4S 1500mAh-6s 11 50mAhM3x10 M3x10M3x10 M3x14M3x12 Button ScrewButton ScrewM3x14Button […]
-
Matek CRSF to PWM converter CRSF-PWM-6
Matek Konvertor can turn a receiver with CRSF protocol into a receiver with 6 PWM outputs for servos. This will be especially appreciated by pilots of classic aircraft models without a FC. So they can use their favorite ELRS or Crossfire Nano receiver. The receiver is connected to the board via UART – pins TX1 […]
Menampilkan 421–432 dari 628 hasil