-
Happymodel Moxon 2.4GHz Antenna for Transmitter Modules (SMA)
Frequency (MHz): 2400.0 Efficiency (dBi): -2.94 Gain (dBi): 4.18 Efficiency (%): 50.77 Directivity (dB): 7.12 Peak Gain Position (Theta): 0.00 Peak Gain Position (Phi): 270.00 Weight(gram): 5.83 Length(mm)*width(mm): 69*45 Plug type: SMA Package include: Happymodel 2.4GHz Moxon antenna x 1pcRp75.000 -
Happymodel OVX300 OVX303 OpenVTX 5.8G 40ch 300mw VTX
Notes: Must work together with a flight controller that supports Smartaudio or Tramp Happymodel OVX300 and OVX303 VTX are based on the Open source project OpenVTX powered by JyeSmith (EpxressLRS team) OpenVTx aims to provide firmware with both the SmartAudio and Tramp protocols. Either protocol can be used on the flight controller and on VTx […]Rp295.000 -
Happymodel OVX306 OpenVTX 5.8G 48ch 400mw VTX
Happymodel OVX306 VTX are based on the Open source project OpenVTX powered by JyeSmith (EpxressLRS team) The size of the OVX306 tx module is the same size as whoop_vtx and whoop_vtx_hp, and the interface are also exactly the same, which can completely replace whoop_vtx and whoop_vtx_hp. OpenVTx aims to provide firmware with both the SmartAudio […]Rp295.000 -
Happymodel RS0802 Brushless Motor 1.5mm shaft
Specifications: Brand name: Happymodel Item name: RS0802 brushless motor KV options: 20000KV or 25000KV Shaft Diameter: 1.5mm Configuration: 9N12P Stator Diameter: 8mm Stator Length: 2mm Motor Dimension(Dia.*Len): Φ10.5mm*13.5mm Terminals: JST1.25mm No. of Cells(Lipo): 20000KV and 25000kv are compatible with only 1S lipo Wire length(exclude connector):30mm Weight: 2g Compatible for Mobula7 and Mobula7 HD 1S version, […]Rp110.000 -
Happymodel RS1102 Brushless Motor 1.5mm shaft
Specification: Mode: RS1102 KV options: 10000KV or 13500KV Configu-ration:9N12P Stator Diamter:11mm Stator Length:2mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*14mm Weight(g):2.8g Recommend battery: 2S 10000KV is the original motor for Mobula7 O4 Includes: 1x HappyModel RS1102 Motor 1x Set of Motor Screws Note: These motors do not have threaded shafts. You can change the rotation direction (CW/CCW) by […]Rp118.500 -
Happymodel SE0702 Brushless Motor 1mm shaft
The new appearance 0702 brushless motor has been released, and it will be shipped You can build an extreme weight tiny whoop with this amazing motors. Great thanks to “Angry Don FPV” for the great job on this light weight 0702 motor. Specifications: Brand Name: Happymodel Mode: SE0702 KV Option:KV23000 KV26000 KV28000 Configu-ration:9N12P Stator Diamter:7mm […]Rp110.000 -
Happymodel SE0802 Brushless Motor 1mm shaft
Specifications: Brand name: Happymodel Item name: SE0802 1-2S brushless motor KV: 16000KV, 19000KV ,22000KV, 25000KV(option) 16000kv for Mobula7 19000kv for Mobula6 Regular edition 25000kv for Mobula6 Race edition Shaft Diameter: 1.0mm Configuration: 9N12P Stator Diameter: 8mm Stator Length: 2mm Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm Terminals: JST1.25mm No.of Cells(Lipo): 1-2S Wire length(include connector): 16000kv 40mm 19000KV 30mm 22000kv […]Rp99.000 -
Happymodel T Antenna Omnidirectional (UFL / IPEX1)
Specification: Frequency (MHz): 2400.0 Efficiency (dBi): -0.89 Gain (dBi): 2.23 Efficiency (%): 81.46 Directivity (dB): 5.12 Peak Gain Position (Theta): 180.00 Peak Gain Position (Phi): 330.00 Efficiency ThetaPol (%): 20.90 Efficiency PhiPol (%): 60.56 Upper Hem. Efficiency (%): 39.93 Lower Hem. Efficiency (%): 41.54 Connector: IPEX/IPX/U.FL Antenna: width 52mm Antenna: length 40mm/90mm(optional) Includes: 1x AntennaRp27.500 -
Happymodel Upgrade Canopy for Mobula7 O4 Angle Adjustable
Specification: Brand Name: Happymodel Item Name: Canopy for Mobula7 O4 and DJI O4 Lite with angle adjustable Material: PP Color option: Transparent black Net Weight: 1.48g Camera angle adjustable Flywoo ND Filter available Best for DJI O4 air unit camera (Lite camera) Package Included: 1 set of Canopy 2 x M1.4×3 screwsRp47.000 -
Happymodel Upgrade Nano3 Canopy for Mobula6 and Mobula7 1S
Brand Name: Happymodel Item Name: Camera Canopy for Mobula6 Material: PP Color option: Transparent Black Net Weight: 1g Camera angle could adjustable easily Best for Runcam Nano3 Package Included: 1 x Camera CanopyRp31.500 -
Happymodel USB 1S Lipo LiHv Battery Charger
This convenient Happymodel USB Charger is tailored for a 200-400 mAh battery. It has an LED light to indicate when charging is complete, as well as a 4.2V/4.35V switchable button. Specifications: Supports Picoblade 1.25, PH 2.0mm battery Supports LiHV 4.35v battery Weight: 4.5g Dimensions: 45x12x6mm Input: USB Output switchable: Fixed at 200~400 milliamps Cutoff voltage […]Rp32.000 -
Happymodel X12 ELRS V2.1 AIO 5-IN-1 Flight Controller
The world first 5-IN-1 AIO flight controller, OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently. It comes with onboard SPI ELRS receiver which support ELRS TX module 2.x firmware, and also provide other receiver option like SPI Frsky receiver which support Frsky D8/D16 , REDPINE and SFHSS. This is an […]Rp950.000
Browse All Categories
Electronic
Battery Charger
Telemetry System