Features:

1: 25.5×25.5 mounting hole position, the entire AIO can be placed in the frame, and the protection is better;
2: It is more convenient to install DJI O3, VISTA, HDZERO, Avatar and other digital VTX;
3: Integrated ELRS 2.4G receiver, suitable for players who are more sensitive to cost and compactness;
4: ESC and FC isolation design reduces failure rate. Even if it is damaged, there is no need to replace everything together, reducing maintenance costs;
5: All interfaces are plug-in designs, suitable for novice players who cannot weld;
6: The USB interface has a straight-out design at the top, making it easier to adjust parameters of the whoop frame;
7: Glue-filled protective treatment greatly reduces the risk of accidental damage due to impact, rain, etc.

AIO SPECIFICATIONS

Model: DarwinFPV F411 45A ELRS AIO
Input voltage: 3-6S Lipo
Mounting dimensions: 25.5×25.5mm
Dimensions: 58.5x38x13mm
Weight: 16.4g
Package dimensions: 79x55x30mm
Package weight: 49.5±2g

FC SPECIFICATIONS

Model: DarwinFPV F411 45A ELRS AIO – FC Board
Main control chip: STM32F411
Gyro: MPU6500
OSD: AT7456E
Receiver: SPI ELRS 2.4G
Input voltage: 3-6S Lipo
BEC: 5V/0.5A x 3 (Built-in overcurrent protection function)
USB interface: 1x USB Type-C
Serial port: UART1, UART2
Soft serial port: S5
Firmware: DARWINF4SX1280HD (BetaFlight)
Dimensions: 38x23x8.5mm
Weight: 3.9g

ESC SPECIFICATIONS

Model: DarwinFPV F411 45A ELRS AIO – ESC Board
Main control chip: EFM8BB21 (8 bit 48MHz)
Input voltage: 3-6S Lipo
Continuous current: 4x45A
Peak current: 4x55A (5S)
Support throttle protocol: Dshot 300/600
Galvanometer: Support (Current Meter Scale=125)
Firmware: J_H_40 (BlueJay)
Power cable: #16AWG/120mm
Mounting dimensions: 25.5×25.5mm
Dimensions: 38×38/x4mm
Weight: 6.6g

Packing List:

1 x DarwinFPV F411 45A ELRS AIO
1 x 120mm power wire (#16AWG red/black)
1 x Analog camera wire (3P)
1 x Analog VTX wire (4P)
1 x GPS wire (4P)
1 x HD VTX wire (4P)
2 x SH1.0 plastic shell (3P)
3 x SH1.0 plastic shell (4P)
1 x Spare screws
5 x M2*6.6 Shock absorbing ball(yellow)
1 x Type-C dust plug
1 x Sticker