Features:
– X14 ELRS 5-IN-1 AIO flight controller built-in 2.4G ELRS V3.0 and OPENVTX
– VTX Power up to 400mw
– ELRS V3.0 (Default), could flash elrs firmware for the receiver by wifi
– EX1103 KV110000 motors
– CaddxFPV Ant FPV camera
– Smooth and powerful
– Compatible for 2S Lipo/LIHV battery
– Recommend 2S 450mah/550mah/650mah battery (Not include)

Specifications:
Brand Name: Happymodel
Model: Mobula8 UART ELRS V3
Item Name: 2S 85mm Micro FPV whoop drone
Wheelbase: 85mm
Size: 120mm*120mm*50mm
Weight: 42g
Receiver: 2.4GHz UART ExpressLRS

Motor
Mode: EX1103 KV11000
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:3mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
Weight(g):3.8g
No.of Cells(Lipo):1-2S

Propellers
Weight:0.88g
Material: PC
Pitch:2.3inch
Props Dia:52.17mm
Center Thickness:5mm
Center Hole Dia:1.5mm

Flight controller
X14 ELRS AIO 5-IN-1 Flight controller
MCU: STM32G473CEU6
Gyro: ICM42688P
Blackbox memory: 16MB
Sensor: Voltage & Current
BEC: 5V, Max. 2A
UART: UART 1, UART 2, UART 3 (For RX), UART 4(For VTX)
BetaFlight OSD: AT7456ELAH
Camera plug: 0.8mm 3pin
ESC: 12A continuous
OPENVTX: 5.8GHz 48 channels, Max. 400mW
FC firmware target: CRAZYBEEG473
USB port: SH1.0-4Pin
Battery connector: XT30 or A30
Mounting hole size: 5mm x 25.5mm
Weight: 83g without power pigtail and VTX antenna

Onboard 4in1 ESC
Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support BLHeliSuite programmable
Firmware target: Z_H_30
Default protocol: DSHOT300
Bluejay firmware ready

Onboard uart ExpressLRS 2.4GHz Receiver
Serial ExpressLRS 2.4GHz
Antenna: Enameled copper wire 31mm length
Firmware target: HappyModel EP1/EP2 2.4GHz RX
Telemetry output Power: <12dBm Compatible with ExpressLRS V3.x.x TX Module ExpressLRS firmware version 3.0.1 Support flash firmware by WIFI Bind method is the same like all ExpressLRS 2.4GHz receivers Onboard 5.8g OPENVTX OPENVTX Firmware Support firmware upgrade by openvtx configurator Output power: PIT/10/25/100/400 Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz Channel SEL: SmartAudio2.1 Modulation type: FM Operating temperature: -10℃~+80℃ Antenna port: IPEX1/U.FL Caddx ANT 1200tvl camera Image Sensor: 1/3″ CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm
Min. Illumination: 0.001Lux@F1.2
Auto Gain Control: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14*14mm(with bracket to 19*19mm)
Wide Power Input: DC 3.7-18V
Weight: 2g (N.W.)

Package Includes:
Mobula8 Frame x1
X14 ELRS AIO flight controller x1
EX1103 KV11000 brushless motor x4
Gemfan Hurricane 2023 tri-blade propellers(4cw+4ccw) x1
Caddx ANT 1200TVL Camera x1
Onboard 5.8G Openvtx 0mw~400mw VTX x1
Canopy for 14mmx14mm camera x1
Screw driver x1