-
Happymodel OVX306 OpenVTX 5.8G 48ch 400mw VTX
Happymodel OVX306 VTX are based on the Open source project OpenVTX powered by JyeSmith (EpxressLRS team) The size of the OVX306 tx module is the same size as whoop_vtx and whoop_vtx_hp, and the interface are also exactly the same, which can completely replace whoop_vtx and whoop_vtx_hp. OpenVTx aims to provide firmware with both the SmartAudio […]Rp315.000 -
Happymodel Mobula6 2024 Frame 65mm Ultra Light Frame
Mobula6 2024 new frame is a ultra lighter 65mm size Brushless Tiny whoop Frame. Compatible most of the 0603/0702/0802 brushless motor. It’s very soft and durable. Specifications: Wheelbase:65mm Weight:2.8g Color option: Transparent black and Transparent white Recommend part list: Propellers: 31mm 3blades or 4blades Motors: 0702 Brushless motor Flight controller : ELRS F4 2G4 or […]Rp50.000 -
Happymodel X12 ELRS V2.1 AIO 5-IN-1 Flight Controller
The world first 5-IN-1 AIO flight controller, OPENVTX(up to 400mw), 12A Brushless Blheli_S ESC and Betaflight OSD coming out recently. It comes with onboard SPI ELRS receiver which support ELRS TX module 2.x firmware, and also provide other receiver option like SPI Frsky receiver which support Frsky D8/D16 , REDPINE and SFHSS. This is an […]Rp950.000 -
Happymodel EX1103S KV7000 Brushless Motors 1.5mm shaft
Notice: Larva X v2 version frame were already compatible with 4-hole motors Specifications: Mode: EX1103S KV options: 7000KV Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Shaft Diameter: Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm Weight(g):3.8g No. of Cells(Lipo): 2-3S Features: High efficiency and smooth Dual bearing design and more balance Better for Toothpick building Compatible with 40mm-75mm propellers Upgrade motor for […]Rp125.000 -
Happymodel Brushless Motor EX1102
Specifications: Mode: EX1102 KV options:9000KV 10000KV 13500KV 19000KV Configuration:9N12P Stator Diamter:11mm Stator Length:2mm Shaft Diameter:Φ1mm or Φ1.5mm Motor Dimension(Dia.*Len):Φ13.5mm*16mm Weight(g):2.8g No.of Cells(Lipo): 9000KV (2-3S) 10000KV (2-3S) 13500KV (2-3S) 19000KV (1S) Features: The lightest 1102 brushless motor all over the world Mobula7 HD original brushless motors Dual bearing design and more balance 40mm – 66mm propellers […]Rp115.000 -
Happymodel 2.4G ELRS EP1 EP2 EP1DUAL TCXO Receiver
EP1 EP2 ELRS receiver is the hottest Tiny ExpressLRS receiver since it was released. Now the new TCXO version EP series receiver apply “temperature compensated crystal oscillator”, accurate frequency and excellent performance in extreme temperature environments make these TCXO much reliable. EP1 TCXO Receiver Type: ISM2.4GHz ESP8285 MCU SX1280(SX1281)IMLTRT RF Module Omni directional antenna Frequency […]Rp220.000 -
Happymodel OVX300 OVX303 OpenVTX 5.8G 40ch 300mw VTX
Notes: Must work together with a flight controller that supports Smartaudio or Tramp Happymodel OVX300 and OVX303 VTX are based on the Open source project OpenVTX powered by JyeSmith (EpxressLRS team) OpenVTx aims to provide firmware with both the SmartAudio and Tramp protocols. Either protocol can be used on the flight controller and on VTx […]Rp295.000 -
Happymodel Crux3 1S ELRS 3 Inch Analog Toothpick
Noticed: Not include the Insta360 go2 or CaddxFPV peanut camera. Features: 40gram 1s brushless Toothpick drone AIO Flight controller with ELRS Receiver and 5.8G VTX CADDX ANT Camera New 1202.5 KV11500 brushless motor Recommend to use 1s 450mah/650mah/660mah/720mah battery Compatible with CaddxFPV Peanut and Insta360 GO2 Carrying Caddxfpv peanut Got 4.5 minutes flying time with […]Rp1.790.000 -
Happymodel ES900RX 915MHZ Replacement T Antenna (UFL / IPEX1)
Frequency: Comaptible with both 915MHz and 868MHz Polarization: linear polarization Impedance: 50 Ω Antenna Gain: 2.5dBi(915MHz) 1.5dBi(868MHz) Working Temp: -40~80℃ Humidity: 95%~100% RH RF Cable : RG1.13 Connector: IPEX1 Weight: 3.57 g Cable Length: 80 mm Width: 140mm Compatibility: Happymodel ES900RX , and other 900MHz ExpressLRS receiver with IPEX Connector,TBS CROSSFIRE NANO RX Package: 1x […]Rp41.000 -
Happymodel Mobula7 HD V2 75mm V3 Frame
New design, more durable than V2 , with Mobula7 Led_strip mount hole The smoke black color v3 frame is original for Mobula7 HD Specifications: Wheelbase:75mm Weight:5.5g could fit the bellowing batteries: Happymodel 2S 300mah Happymodel 3s 300mah GNB 2S 300mah GNB 3S 300mah Compatible for Happymodel 0603/0703/0802/EX1102 seires brushless motors Package: 1x FrameRp33.000 -
Happymodel Upgrade Nano3 Canopy for Mobula6 and Mobula7 1S
Brand Name: Happymodel Item Name: Camera Canopy for Mobula6 Material: PP Color option: Transparent Black Net Weight: 1g Camera angle could adjustable easily Best for Runcam Nano3 Package Included: 1 x Camera CanopyRp31.500 -
Happymodel SE0802 Brushless Motor 1mm shaft
Specifications: Brand name: Happymodel Item name: SE0802 1-2S brushless motor KV: 16000KV, 19000KV ,22000KV, 25000KV(option) 16000kv for Mobula7 19000kv for Mobula6 Regular edition 25000kv for Mobula6 Race edition Shaft Diameter: 1.0mm Configuration: 9N12P Stator Diameter: 8mm Stator Length: 2mm Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm Terminals: JST1.25mm No.of Cells(Lipo): 1-2S Wire length(include connector): 16000kv 40mm 19000KV 30mm 22000kv […]Rp99.000
Browse All Categories
FPV Drone
Battery Charger
Telemetry System